Firmware Version 45.44
Duplex Console IO Dependent Code (IODC) revision 1
Firmware Version 45.44
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 800 MHz Active Functional 67108864 67108864
1 800 MHz Idle Functional 67108864 67108864
Central Bus Speed (in MHz) : 200
Available Memory : 2097152 KB
Good Memory Required : Not initialized. Defaults to 32 MB.
Primary boot path: 0/1/1/1.0
Alternate boot path: 0/1/1/1.13
Console path: 0/0/1/1.0
Keyboard path: 0/0/4/0.0
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 3
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL booting hpux
Boot
: disk(0/1/1/1.0.0.0.0.0.0;0)/stand/vmunix
11587584 + 2310144 + 1550920 start 0x200a68
alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000.
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: autofs_link(): File system was registered at index 3.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 6.
probe: port 1 overcurrent 0x0
probe: port 2 overcurrent 0x0
probe: port 3 overcurrent 0x0
probe: port 1 overcurrent 0x0
probe: port 2 overcurrent 0x0
System Console is on the Built-In Serial Interface
iether0: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/0
iether1: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/1
igelan2: INITIALIZING HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/4/1/0/6/0
Entering cifs_init...
Initialization finished successfully... slot is 9
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 4194304
Starting the STREAMS daemons-phase 1
Checking root file system.
file system is clean - log replay is not required
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 2095104 Kbytes, lockable: 1472784 Kbytes, available: 1698864 Kbytes
/sbin/ioinitrc:
insf: Installing special files for ipmi instance 0 address 16
insf: Installing special files for pseudo driver framebuf
/sbin/krs_sysinit:
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
Resynchronized volume group /dev/vg00
vxfs fsck: sanity check: root file system OK (mounted read/write)
Checking hfs file systems
/sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
HFS file systems are OK, not running fsck
Checking vxfs file systems
/dev/vg00/lvol8 :
vxfs fsck: sanity check: /dev/vg00/lvol8 OK
/dev/vg00/lvol3 :
vxfs fsck: sanity check: root file system OK (mounted read/write)
/dev/vg00/lvol4 :
vxfs fsck: sanity check: /dev/vg00/lvol4 OK
/dev/vg00/lvol5 :
vxfs fsck: sanity check: /dev/vg00/lvol5 OK
/dev/vg00/lvol6 :
vxfs fsck: sanity check: /dev/vg00/lvol6 OK
/dev/vg00/lvol7 :
vxfs fsck: sanity check: /dev/vg00/lvol7 OK
Cleaning /etc/ptmp...
(c)Copyright 1983-2000 Hewlett-Packard Co., All Rights Reserved.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-1992 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1986 Digital Equipment Corp.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2000 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.
(c)Copyright 1991-2000 Isogon Corporation, All Rights Reserved.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the U.S. Government is subject to
restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause in DFARS 252.227-7013.
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, CA 94304 U.S.A.
Rights for non-DOD U.S. Government Departments and Agencies are as set
forth in FAR 52.227-19(c)(1,2).
/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)
HP-UX Start-up in progress
__________________________
Configure system crash dumps ........................................ OK
Removing old vxvm files ............................................. OK
VxVM device node check .............................................. OK
VxVM general startup ................................................ OK
VxVM reconfiguration recovery ....................................... OK
Mount file systems .................................................. OK
Update kernel and loadable modules .................................. N/A
Initialize loadable modules ......................................... OK
Setting hostname .................................................... OK
Start Kernel Logging facility ....................................... N/A
Set privilege group ................................................. N/A
Display date ........................................................ N/A
Copy processor logs to /var/tombstones .............................. OK
Save system crash dump if needed .................................... N/A
Start evp ........................................................... OK
Enable auxiliary swap space ......................................... OK
Start syncer daemon ................................................. OK
Configure Loopback interfaces (lo0) ................................. OK
VxVM volume recovery start .......................................... OK
Configuring all unconfigured software filesets ...................... OK
Recover editor crash files .......................................... OK
Clean UUCP .......................................................... OK
List and/or clear temporary files ................................... OK
Clean up old log files .............................................. OK
Start system message logging daemon ................................. OK
Start pty allocator daemon .......................................... OK
Configuring OLA/R interface ......................................... OK
Start network tracing and logging daemon ............................ OK
Configure HP igelan Gigabit Ethernet interfaces ..................... OK
Configure HP iether Gigabit Ethernet interfaces ..................... OK
Configure HP Gigabit Ethernet interfaces ............................ OK
Configure HP Ethernet interfaces .................................... OK
Create PCI FDDI device files. ....................................... OK
Configure HP 100BASE-T interfaces ................................... N/A
Configure VLAN interfaces ........................................... OK
Configure LAN interfaces ............................................ OK
Start name server daemon ............................................ N/A
Starting HP-UX Secure Shell ......................................... OK
Start NFS core subsystem ............................................ OK
Start NIS+ server subsystem ......................................... OK
Start NIS+ client subsystem ......................................... OK
Start NIS server subsystem .......................................... OK
Start ldap client daemon ............................................ N/A
Start NIS/LDAP server subsystem ..................................... N/A
Start NIS client subsystem .......................................... OK
Start NFS client subsystem .......................................... OK
Start the Trusted Mode with NIS+ subsystem .......................... N/A
Configure pseudo devices for MAC/LLA access ......................... OK
Start multicast routing daemon ...................................... N/A
Start Internet services daemon ...................................... OK
Start dynamic routing daemon ........................................ N/A
Start router discover protocol daemon ............................... N/A
Configuring PPP Interface ........................................... OK
Start RARP protocol daemon .......................................... N/A
Start remote system status daemon ................................... N/A
Configuring man pages for Internet Services ......................... OK
Starting mail daemon ................................................ OK
Starting outbound connection daemons for DDFA software .............. N/A
Start SNMP Master Network Management daemon ......................... OK
Start OSPF MIB Network Management subAgent .......................... N/A
Start SNMP HP-UNIX Network Management subAgent ...................... OK
Start SNMP MIB-2 Network Management subAgent ........................ OK
Start SNMP Trap Dest Network Management subAgent .................... OK
Start HA cluster SNMP subagent ...................................... OK
Start DCE daemons ................................................... N/A
Start SNMP PCI FDDI Network Management subAgent ..................... OK
Start RPC daemon if needed .......................................... OK
Start CIM cimserver subsystem ....................................... OK
Start Isogon License Server Daemon .................................. N/A
Initialize Instant Capacity ......................................... N/A
Starting ISEE hpservices mad daemon. ................................ N/A
Start Runner ........................................................ N/A
Start remote boot daemon ............................................ N/A
Starting X Font Server at TCP port 7000 ............................. N/A
Start vt daemon ..................................................... OK
Starting UDC server ................................................. N/A
Start time synchronization .......................................... N/A
Start accounting .................................................... N/A
Install/Load XF86 DLKM Helper Modules ............................... OK
Starting the password/group assist subsystem ........................ OK
Starting HP Disk Array Manager daemons. ............................. OK
Starting disk array monitor daemons. ................................ OK
Start print spooler ................................................. N/A
Starting HP Distributed Print Service ............................... OK
Start clock daemon .................................................. OK
Start diagnostic subsystem .......................................... OK
Start environment monitoring daemon ................................. OK
Start auditing subsystem ............................................ N/A
Start audio server daemon ........................................... N/A
Start Distributed Single Logical Screen daemon ...................... N/A
Start USB hub daemon ................................................ OK
SAM System administration configuration ............................. OK
OVPA performance software is being started. ......................... OK
Starting evweb PostgreSQL daemons ................................... OK
Configure PRM -or- Configure and Enable PRM ......................... N/A
Start Workload Manager subsystem .................................... N/A
Starting ObAM Application Server .................................... N/A
Initialize Software Distributor agent daemon ........................ OK
Starting the System Management HomePage server ...................... OK
Starting the gWLM Agent ............................................. N/A
Starting CIFS Client ................................................ N/A
Configure HP RAID SA interfaces ..................................... N/A
Copy processor logs to /var/tombstones .............................. OK
Starting Event Monitoring Service ................................... OK
Start EMS SNMP subagent ............................................. OK
Configure HP Fibre Channel Mass Storage interfaces .................. OK
Configure HP Internal RAID interfaces ............................... N/A
Configuring Ultra320 SCSI Mass Storage interfaces ................... OK
Starting the Winbind Daemon ......................................... N/A
Starting the RST EMS listener ....................................... N/A
Configure HP Fibre Channel Tachyon TL/TS Mass Storage interfaces .... OK
Configuring HP Fibre Channel FCD Mass Storage interfaces ............ OK
VVR - Starting Communication Daemon ................................. N/A
VVR - Starting VRAS daemon .......................................... N/A
VVR - Starting VxRSync daemon ....................................... N/A
Starting VERITAS Enterprise Administrator Service (vxsvc) ........... OK
Start NFS server subsystem .......................................... OK
Start X print server(s) ............................................. N/A
Start Highly Available cluster ...................................... N/A
Starting HP-UX Apache-based Web Server .............................. OK
Starting HP-UX Tomcat-based Servlet Engine .......................... N/A
Starting HP-UX Webmin-based Admin ................................... OK
Starting the HPUX Webproxy subsystem ................................ N/A
Starting HP-UX XML Web Server Tools ................................. OK
Starting OVTrcSrv... ................................................ OK
Starting OVCtrl... .................................................. OK
Start CDE login server .............................................. OK
Start MySQL Server .................................................. OK
Starting PRNGD (Pseudo Random Number Generator Daemon) .............. OK
The system is ready.
GenericSysName [HP Release B.11.11] (see /etc/issue)
Console Login:
Thank you for Reading,
For Reading other article, visit to “https://sites.google.com/site/unixwikis/”
|
